Effect of thickness on the thermo-hydraulic performance of porous volumetric solar receivers with different internal geometries

Abstract In this work, the effect of thickness on the thermal and hydrodynamic performance of porous volumetric solar receivers made of open-cell silicon carbide (SiC) ceramic foam is investigated using an in-house detailed numerical model. The model is based in a Computational Fluid Dynamics (CFD) technique to solve the volume averaged mass, momentum and energy conservation equations, including the exchange of thermal radiation inside the receiver. A Monte Carlo Ray Tracing (MCRT) method was developed and then used to model the solar radiation transport in the porous media. Two optimised internal geometries (porosity and pores size) of the receiver with adiabatic side-walls are investigated for different thicknesses. Results show that the optimal thickness depends on the porosity and pores size and there is a value from which the thermal efficiency is nearly constant and the pressure drop always increase. It was also found that the thickness should be approximately between 5 and 7 cm for porosity and pores diameter between 0.85 and 0.90 and 3.0 mm and 4.5 mm, respectively, aiming to maximise thermal efficiency by decreasing the transmission losses of solar radiation, and to keep low pressure drop.