A control strategy considering buildings’ thermal characteristics to mitigate heat supply-demand mismatches in district heating systems

In district heating systems (DHS), periodic heat supply-demand mismatches (HSDM) exacerbate issues such as thermal imbalance and hydraulic instability. To mitigate these issues, this paper proposes a supply water temperature correction strategy for heating stations that considers building's thermal characteristics. Firstly, buildings are classified into energy-saving levels based on comprehensive thermal characteristic Bc and heat load index. Secondly, simulation models are developed for buildings with different thermal characteristics, and response of indoor temperature to supply-demand mismatch rates was analyzed. Then, after determining the regulation sequence and supply water temperature of heating stations, a balanced control strategy is formulated for HSDM conditions. Finally, the proposed strategy was applied to a practical combined heat and power system (CHPS) in severe cold regions. The results showed that the studied heating stations were classified into 4 types. After regulation of both insufficient and excessive heating conditions, the indoor temperature guarantee rate increased by over 20 %; the ranges of thermal imbalance degree and hydraulic imbalance degree were reduced by more than 0.09 and 0.22, respectively; the SD of supply water pressure and supply-return pressure difference were reduced by over 0.17 and 0.11, respectively. The strategy provides a reference for global balanced control of DHS under similar HSDM conditions.