A 12-Bit 1-GS/s Pipelined ADC with a Novel Timing Strategy in 40-nm CMOS Process
Electronics(2023)
摘要
This paper presents a 1-GS/s12-bit pipelined analog-to-digital converter (ADC) fabricated in 40-nm CMOS technology that optimizes the settling time, bit error rate, and robustness. This ADC uses an improved timing called pre-quantization timing (PQT), which implements quantization in half the time of the sampling phase to maximize the output-settling time of the operational amplifier (op-amp). A complete clocking scheme along with a delay lock loop (DLL) is proposed to generate an accurate timing no matter how process, voltage, and temperature (PVT) change. Based on PQT, a high-speed comparator circuit is adopted to obtain a bit error rate (BER) below 10−15. Sample and hold amplifier (SHA) is used to guarantee robustness over the wide input frequency. Furthermore, a low-cost automatic calibration is implemented to correct residual curves, and inter-stage gain errors are also corrected. This ADC achieves a signal-to-noise-and-distortion ratio (SNDR) of 57.3 dB and a spurious-free dynamic range (SFDR) of 78.5 dB at a 227 MHz input frequency. The measured differential nonlinearities (DNL) and integral nonlinearities (INL) after calibration are ±0.7 LSB and ±1.50 LSB, respectively. The power consumption of the ADC core is 97.6-mW, and the Walden figure of merit (FoM) is 172.9-fJ/conversion-step.
更多查看译文
关键词
analog-to-digital converter,pipelined,timing strategy,delay lock loop,bit error rate,residual curves,sample and hold amplifier
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要