Robotically assisted outflow graft anastomosis in minimally invasive left-ventricular assist device implantation: feasibility, surgeon comfort, and operative times in an anatomical study

Upper hemi-sternotomy is a common approach for outflow graft anastomosis to the ascending aorta in minimally invasive left-ventricular assist device implantation. Right mini-thoracotomy may also be used, but use of robotic assistance has been reported only anecdotally. The aim of our study was to confirm the feasibility of robotically assisted suturing of the outflow graft anastomosis and to assess performance metrics for the robotic suturing part of the procedure. The procedure was carried out in eight cadaver studies by two surgeons. The assist device pump head was inserted through a left-sided mini-thoracotomy and the outflow graft was passed toward a right-sided second interspace mini-thoracotomy through the pericardium. After placement of a partial occlusion clamp on the ascending aorta, a longitudinal aortotomy was performed and the outflow graft to ascending aorta anastomosis was carried out robotically. The procedure was feasible in all eight attempts. The mean outflow graft anastomotic time was 20.1 (SD 6.8) min and the mean surgeon confidence and comfort levels to complete the anastomoses were 8.3 (SD 2.4) and 6.9 (SD2.2), respectively, on a ten-grade Likert scale. On open inspection of the anastomoses, there was good suture alignment in all cases. We conclude that suturing of a left-ventricular assist device outflow graft to the human ascending aorta is very feasible with good surgeon comfort. Anastomotic times are acceptable and suture placement can be performed with appropriate alignment.