Pilot-scale electrochemical advanced oxidation (EAOP) system for the treatment of Ni-EDTA-containing wastewater.

Electrochemical advanced oxidation processes (EAOP) have shown great potential for the abatement of complexed heavy metals, such as metal-EDTA complexes, in recent studies. While removal of metal-EDTA complexes has been extensively examined in bench-scale reactors, much less attention has been given to the efficacy of this process at larger scale. In this study, we utilize a 72 L pilot-scale continuous flow system comprised of six serpentine flow channels and 90 pairs of flow-through electrodes for the degradation of Ni-EDTA complexes and removal of Ni from solution. The influence of a range of key operating parameters including flow rate, current density and initial Ni-EDTA concentration on rate and extent of Ni-EDTA degradation and Ni removal were examined. Our results showed that at a feed flow rate of 36 L h-1, current density of 5 mA cm-2 and initial Ni-EDTA concentration of 1 mM, the pilot-scale system achieved 74 % total Ni removal, 78 % total EDTA removal and 40 % TOC removal with energy consumption of 13.6 kWh m-3 order-1 and energy efficiency of 7.9 g kWh-1 for total Ni removal. A mechanistically-based kinetic model, which was developed in our previous bench-scale study, provides a satisfactory description of the experimental results obtained in the pilot-scale unit. Long term operation of the pilot-scale unit resulted in corrosion of PbO2 anode along with inorganic scaling as well as organic fouling on the PbO2 surface resulting in an obvious decline in Ni-EDTA degradation. Overall, the results of this study suggest that large scale anodic oxidation of wastewaters containing metal-organic complexes is an effective means of degrading organic ligands thereby enabling removal of the metal at the cathode. However, additional efforts are required to enhance the durability of the anode material and reduce material costs and energy consumption.