Numerical simulations of residual stress formation and its effect on fatigue crack propagation in a fillet welded T-joint

The welding process induces residual stresses because of the non-uniform heating and cooling of the material. Residual stresses are known to influence fatigue crack growth. However, studies addressing both the formation of residual stress - giving a realistic multi-directional stress and strain field - and redistribution of residual stresses due to crack growth in the case of a surface crack have not been found. The extended finite element method was employed in this study to evaluate the stress intensity factors of a planar, growing crack in a welded T-joint with and without welding induced residual stresses. The initial residual stress field was taken from a welding simulation using the finite element method. The redistribution of the residual stress field due to crack growth was studied in addition to the shape and growth rate of the planar crack. The study shows that, in agreement with experimental evidence, the external stress ratio has a significant influence in the absence of residual stress but it does not have a significant influence in the presence of residual stress. The current study gives insight into the cause of this observation.