Effect of polypyrrole-derived N-doped carbon coating on the sodium storage properties of NiCo2S4 synthesized by recycling discarded mobile phone batteries

NiCo2S4 with a spherical spinel structure was innovatively synthesized from discarded mobile phone batteries using a simple hydrothermal method, and the surface was coated with N-doped carbon to form NiCo2S4@NC. The products were used as anode materials of sodium-ion batteries to study the effect of the N-doped carbon layer on the electrochemical properties, structure and morphology. The results of XRD, FESEM and TEM revealed that the N-doped carbon layer derived by carbonizing polypyrrole had a minimal effect on the structure and morphology of NiCo2S4, but was coated on the surface of NiCo2S4 with different thicknesses to adjust the electrochemical performance. The presence of N-doped carbon in NiCo2S4@NC was confirmed by Raman spectroscopy. The mesoporous structure of NiCo2S4 and NiCo2S4@NC was corroborated by N2 adsorption-desorption isotherm analysis, and the optimal specific surface area and pore size were 23.14 cm2/g and 18.0 nm, respectively. X-ray photoelectron spectroscopy indicated that Co2+/Co3+ and Ni2+/Ni3+ coexist in the spinel NiCo2S4@NC50 synthesized upon adding 50 μL of pyrrole monomer. NiCo2S4@NC50 outperformed other products in terms of its electrochemical properties, where its initial discharge specific capacity under the current density of 0.1 A g–1 was 1099.6 mAh g–1 and the specific capacity following 100 cycles reached 327.5 mAh g–1. NiCo2S4@NC50 exhibited an optimal electrochemical performance and demonstrated a competent approach toward recycling discarded mobile phone batteries and building electrodes with high performance for use in energy equipment.