Enhancing performance in solar air channels: A numerical analysis of turbulent flow and heat transfer with novel shaped baffles

Solar air heaters are emerging as a promising solution for sustainable heating, as they harness abundant solar energy to provide heat for a variety of applications. However, their optimum efficiency remains a major challenge. Deflectors have significant potential to improve the performance of solar air heaters by redirecting airflow and optimizing heat transfer, making them more efficient and more suitable for large-scale adoption. This article examines the performance of a new baffle design aimed at improving heat transfer in the channel by increasing the exchange surface between fluid and solid surface. It consists of a “≠” -shaped baffle mounted on the top and bottom walls of the channel. An in-depth analysis of the spacing between these baffles was carried out to assess their impact on the thermal and aerodynamic properties of the solar air channel. Computational Fluid Dynamics (CFD) was used to perform the calculations, using the Finite Volume Method (FVM) in conjunction with the SIMPLE algorithm. All studies are carried out using the CFD code Fluent. Crucial steps in this research include studying the influence of these new baffles at different Reynolds numbers, ranging from 15000 to 35000, as well as varying the separation distance between the two baffles, chosen periodically (DBaffle/2, 3DBaffle/4, DBaffle, 5DBaffle/4 and 3DBaffle/2). Some of the numerical results were validated with the available experimental data and showed satisfactory agreement. The study identified an optimal case for the new baffles, by reducing the distance between the baffles, an improvement in system performance was observed, by increasing the flow strength and widening the recycling cells, which has an impact on dynamic behavior and heat transfer. The presence of this new baffle design, with minimal separation distance between them, demonstrated a significant thermal improvement, with a thermal improvement factor increasing by 44% compared to the simple channel without baffles, thus highlighting the effectiveness of the new solar air channel with “≠” -shaped baffles.