Carbon coated iron pyrite (C–FeS2) photo-electrode for photo-electrochemical water splitting

In this paper, we present fabrication of ‘FeS2’ and carbon coated FeS2 (C–FeS2) photo-electrodes and demonstrated that coating of carbon on FeS2 significantly enhanced photo-electrochemical properties. The hydrothermal method has been adopted for the synthesis of FeS2 and carbon coating on FeS2 was achieved by CVD technique. The materials are subsequently characterized using X-ray diffraction, Raman spectroscopy and Field enhanced scanning electron microscope (FESEM) techniques for phase identification and morphological studies, respectively. The photo-electrochemical measurements revealed significant enhancement in the current density from ∼2 to 3.7 mA/cm2 (∼1.8 times higher) for C–FeS2 in comparison to the FeS2 photo-electrode under visible light. The enhancement in FeS2 after carbon coating has been attributed to reduction in recombination of photo generated charge carriers, enhancement in the band bending and lowering the charge transfer resistance at the semiconductor/electrolyte interface. To date, very few studies have been reported on FeS2 based composites for water splitting applications and use of carbon coating can be a novel approach for developing efficient solar to hydrogen conversion devices. The mechanism for the photocurrent enhancement was supported by Mott-Schottky and electrochemical impedance spectroscopy measurements.