Experimental and numerical study on extended endplate beam-column joints after high temperature to resist progressive collapse

This paper presents experimental and numerical investigations on the collapse-resisting behavior of extended endplate beam-column joints after high temperatures. The failure patterns and structural responses of extended endplate (EP) joints after high temperature to resist progressive collapse were first described, and then the effects of fire temperature and temperature duration on their collapse resistance mechanisms were also analyzed in detail. The test results demonstrate that all specimens withdrew from work owing to the serious deformation of endplate bolt holes or the brittle fracture of high-strength bolts, resulting in the catenary mechanisms of EP joints not being adequately developed. Compared with previous studies, it is shown that the fire temperature exerts the most significant effects on the carrying capacities and deformability of EP joints, and the collapse resistance of corresponding assemblies is most sensitive to the fire temperature. However, the temperature durations have an insignificant influence on the development of flexural mechanism resistance, especially for those after 600 °C and 800 °C. Moreover, the corresponding refined FE models in consideration of the damage and fracture of ductile metals have been established to reproduce the structural response of specimens after high temperature. To improve the post-fire collapse-resisting performance of assemblies, both the lateral plate reinforcement and welding reinforcement methods were proposed and compared with the assistance of validated FE models. From a practical viewpoint, the reinforcement with lateral plates is determined as a superior technique for post-fire EP joints against progressive collapse.