A comparative study on hydrocarbon detection using cepstrum–based methods

Amplitude anomaly caused by a high–frequency component is attenuated more rapidly than a low–frequency component for a seismic trace in sediments susceptible to gas influence and is always used as a direct indicator of hydrocarbons. Recently, cepstrum–based hydrocarbon detection methods have become an important exploration pathway for detecting amplitude anomalies in the gas–bearing formation more sensitively and accurately. In this study, we compared three cepstrum–based hydrocarbon detection methods. We compared their fluid identification abilities in gas reservoirs and the noise robustness. They were further compared with the traditional absorption coefficient estimation method. We also indicate how the choice of the selection of the sliding–window length influences the performance of the three cepstrum–based hydrocarbon detection methods. Model test results and real data applications show that for thick gas reservoirs, the hydrocarbon detection methods using the Berthil–based cepstrum and the wavelet–based cepstrum can better discriminate the upper and lower interfaces than the hydrocarbon detection method using the Fourier–based cepstrum. For thin gas reservoirs, the hydrocarbon detection method using the wavelet–based cepstrum can identify the lower interface of the gas–bearing reservoir more obviously than the upper interface. The hydrocarbon detection method using the Berthil cepstrum cannot identify the upper and lower interfaces of the gas–bearing reservoir, but it shows higher temporal and spatial resolution compared to the hydrocarbon detection method using the Fourier–based cepstrum. For noise robustness, the hydrocarbon detection method using the wavelet–based cepstrum has the strongest noise robustness property, and the hydrocarbon detection method using the Fourier–based cepstrum is the most sensitive method to the noise. For time–consumption, the hydrocarbon detection method using the wavelet–based cepstrum is the most time–consuming, and the hydrocarbon detection method using the Fourier–based cepstrum is the fastest.