Dynamic modeling and energy demand analysis of chain heavy load transfer system on marine mobile platform

The demand for transferring the heavy load on marine mobile platform is steadily increasing, surpassing the capabilities of the current system. This paper introduces a chain heavy load transfer system and develops its dynamic model. This paper studies the sensitivity laws of the system's energy demand to unknown parameters and proposes an adaptive mutation particle swarm optimization (AMPSO), whose identification accuracy is verified through comparative analysis. Experimental verification confirms the reliability of the system model while studying the influence of environmental loads on the system's energy demand. The results demonstrate that the chain transfer system meets the requirements of marine mobile platforms, and the system model incorporates the primary influencing factors. Unknown parameters significantly influence the system's energy demand, and the displacement error after parameter identification using AMPSO is 0.00056 rad, substantially enhancing the accuracy of model calculations. The model calculations of the system closely align with experimental measurements, with a maximum displacement error not exceeding 0.004 rad. Sway exerts a greater influence on the system's energy demand compared to tilt. When tilt and sway are superimposed, the friction torque between the load and the track results in increased input torque and power for the vertical arrangement of the system, with a maximum torque of 328.6kNm and maximum power of 400 kW.