Interaction of composite fume suppression and order elimination agents with crumb rubber modified asphalt: Inhibition behavior of volatile organic compounds (VOCs) and inorganic fume

The production and construction of crumb rubber modified asphalt (RMA) at high temperatures can produce a large amount of toxic fume, which is detrimental to human health and environment. In this study, a series of composite fume suppression and odor elimination agents (CSEAs) with both physical adsorption and chemical capture functions were adopted to reduce the emissions of volatile organic compounds (VOCs) and hydrogen sulfide (H2S). The material composition, microstructure, and specific surface area of CSEA were analyzed by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and N2 adsorption-desorption isotherm (BET). The inhibitory effects of adding CSEA on toxic fume emissions from RMA at high temperatures were investigated through a combination of fume emission tests, H2S gas detection, gel permeation chromatography (GPC), and gas chromatography–mass spectrometry technology (GC–MS). The adsorption behavior of CSEA on H2S was analyzed through adsorption dynamics. Results showed that the physical and chemical properties of CSEA are stable while chemical adsorption dominates the CSEA's effect on H2S. ZnO and Ca(OH)2 exhibit good crystallization effects on the surface of the carrier by forming mesoporous structures mostly above 3.4 nm in size. The incorporation of CSEA significantly reduced the total emissions of RMA fume and the main components of VOCs in which the average inhibition rate of H2S can reach 44 % at an initial 30 mins.