Calculation of Column Pile Heave in Deep Excavation Based on the Rebound–Recompression Method

Excessive column pile heave may result in engineering disasters such as instability of retaining structures and cracking of existing engineering piles in deep excavations. However, factors such as support weight, changeable support restraint resistance, and soil disturbance at the bottom of the excavation are often ignored or simplified in existing calculation methods but have a significant impact on the calculation results. Based on field soil parameters obtained by the rebound–recompression method, a semi-analytical method is proposed for estimating column pile heaves in a deep excavation. This method considers the influence of soil disturbance, the weight of the retaining structure, and the changeable horizontal support restraint, making the calculation result more consistent with the realistic situation. This method can also be used to analyze load transfer between the pile and the surrounding soil. The rationality of this proposed calculation method is verified by measured data, where the variation in pile stress state during deep excavation is analyzed. Finally, a parametric study is conducted, and the results show that the excavation size and the excavation depth have a great influence. However, the heave is hardly affected by the value of the limit relative displacement. The use of long piles with small diameter and the method of small block excavation are effective means to control the column pile heave. When the excavation area is large or the effective pile length is short, the factor of the position of the column pile cannot be ignored.