Experimental PSA reactor for methanol-enhanced production VIA CO2 hydrogenation

Methanol synthesis via catalytic CO2 hydrogenation has emerged as one of the main ways to valorize CO2. The main problem is that the methanol synthesis reaction is thermodynamically controlled, and there is a parallel endothermic reaction, reverse water gas shift (RWGS), so low methanol production ratios are achieved.In this scenario, process intensification, particularly multifunctional reactors where reaction and separation occur simultaneously, is of great interest. Sorption-enhanced reaction processes (SERP) technologies are widely used in equilibrium-controlled processes to increase reagent conversion through selective product removal.Various authors have proposed SERP processes for CO2 hydrogenation to methanol, but most of them are simulations studies and it is difficult to find experimental data. The aim of the work is the experimental study of the CO2 conversion and selectivity to methanol of a SERP process based on a four-step PSA reactor. The process has been carried out with a commercial Cu/ZnO/Al2O3 catalyst and commercial 3A zeolite as adsorbent.Conversions beyond the equilibrium have been achieved in the SERP process, even complete conversion of CO2 at 50 bar, 250 °C, and 300 °C. In the cyclic process, high CO2 conversions far from equilibrium are achieved in all the range of temperatures, 200–300 °C. The best results of methanol yield are achieved at 250 °C and 50 bar, followed closely by 200 °C. It is worth mentioning that methane is detected in the transitory state at 300 °C and 50 bar. Also, the purge step has been studied, concluding that it is necessary for adsorbent regeneration, improving CO2 conversion in the cyclic steady state.