In Vivo Biomechanical Dynamic Simulation of a Healthy Knee During the Single-leg Lunge and Its In Vitro Experiment Validation

Biomechanical modelling of the knee during motion is a pivotal component in disease treatment, implant designs, and rehabilitation strategies. Historically, dynamic simulations of the knee have been scant. This study uniquely integrates a dual fluoroscopic imaging system (DFIS) to investigate the in vivo dynamic behavior of the meniscus during functional activities using a finite element (FE) model. The model was subsequently validated through in vitro experiments. Motion capture of a single-leg lunge was executed by DFIS. The motion model was reconstructed using 2D-to-3D registration in conjunction with computed tomography (CT) scans. Both CT and magnetic resonance imaging (MRI) data facilitated the development of the knee FE model. In vivo knee displacements and rotations were utilized as driving conditions for the FE model. Moreover, a 3D-printed model, accompanied with digital imaging correlation (DIC), was used to evaluate the accuracy of the FE model. To a better inner view of knees during the DIC analysis, tibia and femur were crafted by transparent resin. The availability of the FE model was guaranteed by the similar strain distribution of the DIC and FE simulation. Subsequent modeling revealed that the compressive stress distribution between the medial and lateral menisci was balanced in the standing posture. As the flexion angle increased, the medial meniscus bore the primary compressive load, with peak stresses occurring between 60 and 80 degrees of flexion. The simulation of a healthy knee provides a critical theoretical foundation for addressing knee pathologies and advancing prosthetic designs.