Aerodynamic breakup of gel suspension droplets loaded with aluminum particles

The persistent and frequent space explorations are affected by the performance of propellants, among which the closely related gel propellants have been widely used due to their unique characteristics. Currently, research efforts primarily concentrate on the metallization and atomized combustion of gel propellants, emphasizing the combustion performance of metallized gel propellants. However, little attention has been given to the secondary breakup process that occurs just before combustion. By utilizing high-speed flow visualization technology, this study examines the key aerodynamic breakup process of gel suspension droplets loaded with micro aluminum particles, experimentally and theoretically investigating the droplet dynamics induced by particle volume fraction. The experimental confirmation of the three breakup behaviors exhibited by gel suspension droplets, namely oscillation mode, bag-stamen breakup, and hemline breakup, is presented along with the construction of a phase diagram. The impact of heterogeneous effects resulting from an increase in particle volume fraction on the critical breakup Weber number is revealed, with a concentration of 9% as the turning point. Within the range of moderate Weber numbers, the tail flick deformation of suspension droplets in airflow is observed and reported for the first time. At different particle concentrations, there keeps a linear correlation between the dimensionless tail length and Weber number. Spherical suspension droplets will deform into thin disks in the airflow, with a nearly constant deformation rate regardless of changes in particle concentration. Additionally, the relationships between characteristic times and droplet parameters are discussed through statistical analysis of the results. As Ohnesorge number and particle volume fraction increase, the characteristic times both show a monotonically increasing trend. Moreover, a model of unstable growth rate associated with the particle volume fraction is established through linear instability analysis, accurately predicting the variation in critical Weber number for gel suspension droplet breakup. The congruence between our theoretical framework and experimental findings not only enhances comprehension of the impact of micro aluminum particles on the secondary breakup of gel suspension droplets but also provides valuable guidance for the aerospace applications of metallized gel propellants.