Design of Series-Connected Novel Large-Scale Offshore Wind Power All-DC System with Fault Blocking Capability

The utilization of wind power all-DC systems with DC collection and transmission is an effective solution for the extensive development of wind power in deep-sea areas. However, in the event of faults occurring in wind power all-DC systems, the fault propagation speed is extremely rapid, with a wide-ranging impact, and to date, there are no complete DC engineering references available. It is crucial to research the topology and fault isolation methods applicable to large-scale offshore wind power all-DC systems in deep-sea areas. This paper proposes a novel series-connected all-DC system topology and presents corresponding fault isolation methods for internal faults in wind turbine units and faults in high-voltage DC transmission lines. The system simulation model was constructed using PSCAD/EMTDC (v4.6.3), and simulations were conducted for internal faults in the wind turbine units and DC transmission line short-circuit faults. The simulation results demonstrate that the proposed system can isolate various DC faults while maintaining stable operation, thereby validating the effectiveness of the control strategies and fault isolation methods proposed in this paper.