Development of Microcontroller Based Water Quality Monitoring and Water Level Control Device

Access to clean and safe water is not only a fundamental human right but also a vital requirement for electronics industries, chemicals industries, pharmaceuticals, food and beverage production, fisheries and aquatic farming. This project addresses the pressing issue of water quality monitoring and efficient water usage within the context of these industries. The study's identification of problem areas for water quality can lead to more efficient interventions and solutions to safeguard the environment, and prevent waterborne diseases. This paper presents the design and implementation of microcontroller-based system for monitoring water quality and water level in the thank, the water in the thank is refilled when it goes beyond a set threshold with the aid of an automatic switch control. The system is a hybrid of 3 subsystems: a Water Level Checker, a Water Quality Monitoring System and an Automatic Switch control system. The Water level checker consists of Ultrasonic sensors. The Water Quality Monitoring system consists of pH sensors, TDS (Total Dissolved Solids) sensors and Turbidity sensors. The continuous (Analog) data from the water quality sensors used would be outputted via an LCD (Liquid Crystal Display). The Automatic Switch control system consists of 5v Relay modules and a 12v Pump that would automatically switch ON/OFF depending on the level of water in the tank. The values of EC (Electrical Conductivity) and TDS spike drastically to the introduction of salt from as low as 138 -906 for TDS and 0.34 – 2.04 for EC, signifying increase in water capacity of electrical conductivity. Temperature rise in the afternoon also increases TDS values from 142 for clean water to 920 for the salty water while it ranges from 138 for clean water to 906 for salt water at both morning and evening time. Pumping aspects of the system are triggered when water level in the thank falls below 10% and trips off when water level goes above 95% as programmed in the control unit. The developed system marks a significant achievement in water management and automation technology. integration of quality monitoring sensors has enabled real-time evaluation of water parameters that holds potential for applications in environmental monitoring, ensuring safe drinking water, and safeguarding aquatic ecosystems. The automated switch control mechanism responds dynamically to water levels, enabling the system to trigger actions such as pump activation or filling processes based on predefined thresholds.