Fatigue crack growth and slow crack growth of HDPE pipes under internal pressure and fiat plate compression

High-Density Polyethylene (HDPE) pipes are widely used in city gas and water systems as buried pipelines for their excellent performance. However, in addition to the internal pressure, it also suffers loads from traffic vehicles, foundation settlements, and illegal buildings. In this paper, fatigue crack propagation of HDPE pipes with a longitudinal external crack was experimentally studied under different load ratios in two cases. Pulsatile internal pressure was implemented in the first case. In the other one, pulsatile fiat plate compression and constant internal pressure were applied. The crack mouth opening displacements were recorded by the digital image correction technique. The crack depth was obtained with compliance calibration. It shows that the fatigue crack growth rate decreases as the load ratio increases. In both cases, the slow crack growth kinetics were gained by extrapolating the load ratio to 1.0, representing constant internal pressure or fiat plate compression.