Advanced Alkaline Water Electrolysis Stack with Non-Noble Catalysts and Hybrid Electrical Connections of the Single Cells

In this research, a thin layer of multi-metallic non-precious catalyst is prepared by electroplating from an electrolyte bath containing Ni, Co, and Fe sulfates over pressed commercial nickel foam electrode. The composition of the deposited catalytic film and its morphology are characterized by scanning electron microscopy (SEM) with energy dispersion X-ray (EDX) techniques. The efficiency of the prepared binder-free electrodes for electrochemical water splitting is investigated in a self-designed short water electrolysis stack with zero-gap configuration of the integrated single cells and hybrid electrical connections. The separator used is a commercial Zirfon Perl 500 membrane, doped with 25% KOH. The performance of the catalyst, the single cells, and the developed electrolyzer stack are examined by steady state polarization curves and stationery galvanostatic stability tests in the temperature range 20 degrees C to 80 degrees C. The NiFeCoP multi-metallic alloy demonstrates superior catalytic efficiency compared to the pure nickel foam electrodes and reliable stability with time. The single cells in the stack show identical performance and the cumulative stack parameters strictly follow the theoretical considerations. The applied hybrid electrical connections enable scaling of both the stack voltage and the passing current, which in turn ensures flexibility with regard to the input power and the hydrogen production capacity.