Cyclic behavior of laminated bio-based connections with slotted-in steel plates: Genetic algorithm, deterministic neural network-based model parameter identification, and uncertainty quantification

To support more sustainable construction, this paper experimentally investigates the cyclic behavior of laminated timber (Laminated Veneer Lumber (LVL)) and glubam (Glue Laminated Bamboo) connections with slotted -in steel plates in terms of experimental test, numerical simulations and parameter identification. Experimental tests included eight different configurations: two materials (LVL and glubam), two bolt diameters (8 and 10 mm), and one or two bolts. Two different cyclic -loading protocols were applied for each type of connection: only tension and tension/compression. The observed behavior is then compared to a finite element model developed in OpenSeesPy, which takes into account factors such as sliding, contact, pinching, cyclic stiffness, and strength degradation. To identify the best set of parameters for the model, three different approaches are considered: genetic algorithm, fast deterministic neural network, and probabilistic Bayesian method. First, the model identification is carried out by means of a genetic algorithm -based optimization. The parameter -identification results are evaluated in terms of elastic stiffness, yielding point, and ductility. Next, a sensitivity analysis is performed to determine the significance of the parameters, and an innovative approach combining neural network and sensitivity analysis is proposed for fast and preliminary parameter identification. Then, probabilistic Bayesian identification is employed to calculate the posterior distribution of the model parameters identified and the confidence bounds of the estimated response. Finally, different model identification parameters are compared and suggestions for algorithm selection are provided.