Incorporating porous carbon materials into ionic liquid for high efficiency extraction of polycyclic aromatic hydrocarbons

Ionic liquid is an ideal candidate in the extraction of aromatic compounds. The design and construction of ionic liquids with high extraction efficiency and selectivity towards to the specific aromatics remain crucial question. In this paper, with the aid of orthogonal array experiment, the imidazolium-based ionic liquids with long alkyl chain on the cations were determined to possess high aromatics extraction efficiency. Furthermore, the Lewis acid anion was introduced into the ionic liquid to form 1-dodecyl-3-methylimidazolium ferric chloride ([C12mim][FeCl4]) and performed 62 % and 100 % extractant efficiency of naphthalene and anthracene, respectively. Then the porous carbon materials (P1-1000) derived from hyper-crosslinked porous polymers (HCP) which possessed high BET surface area (1186 m2/g) was dispersed in [C12mim][FeCl4] to form porous ionic liquid. The single extraction efficiency of naphthalene improved from 62 % to 77 %. The great single extraction efficiency was attributed to the high porosity, additional adsorption sites provided by the Lewis acid anions and the hydrophobic long alkyl chain on the cations. After three times extraction, the concentration of naphthalene dropped down to 0. The porous ionic liquids also showed good recycle performance. The construction of porous ionic liquids provided an efficient approach for extraction of polycyclic aromatic hydrocarbons from aliphatic hydrocarbon.