Porous hollow nanospheres nickel phosphide and its high catalytic hydrogenation performance on naomaohu coal soluble portion and model compounds

The catalytic conversion of oxygen-containing aromatic ring in lignite under mild conditions is crucial to obtain clean liquid fuel. Here, hollow nanosphere Ni3P-500–24 catalysts were prepared at a calcination temperature of 500 °C and acid-etching time of 24 h. The porous hollow nanospheres structure could expose more catalytic sites, and the electron-rich nickel exhibited a good catalytic activity. The conversion rate of benzyl phenyl ether (BPE) was 100 % (140 ℃, 1 MPa H2, 2 h), and the main products were methylcyclohexane and cyclohexanol, indicating that the catalyst had good catalytic hydrocracking performance. In addition, the catalyst exhibited certain deoxygenation activity and high product selectivity for other oxygen-containing model compounds. For the catalytic hydrogenation of Naomaohu coal (NMHC) soluble portion, the content of alkanes increased from 19 % to 47 %, while the content of oxygen-containing compounds decreased from 56 % to 21 %, which further demonstrate that the catalyst have good catalytic hydrogenation and deoxygenation performance. Density Functional Theory (DFT) calculations showed that the properties of the Ni3P-500–24 catalyst was similar to noble metal, which could activate H2 to produce two kind of active hydrogen: H radical and diatomic hydrogen. The synergistic pathways for the transfer of active hydrogen during the catalytic hydroconversion (CHC) process were analyzed. Above results could provide theoretical guidance for the conversion of lignite into high-quality clean liquid fuels.