Understanding the Influences of Multiscale Waviness on the Elastohydrodynamic Lubrication Performance, Part II: The Partial-Film Condition

This paper is the second part of a two-part report studying the responses of a typical point-contact elastohydrodynamic lubrication (EHL) system to multiscale roughness mimicked by wavy surfaces. The wavy surfaces are defined by three key parameters: amplitudes, frequencies, and directions. The previous Part I paper focuses on the full film lubrication condition, while the current paper focuses on the partial film regime where asperity contacts occur. A transient thermal EHL model simulates lubrication problems with different waviness parameters, loads, and speeds. The total number of simulations is 1600. Performance parameters, including the asperity contact ratio, minimum film thickness, maximum pressure, central point film thickness, central point pressure, mean film thickness, coefficient of friction (COF), and the maximum temperature rise, are obtained for each simulation. These performance parameters are post-processed in the same manner as those in the previous Part I paper. The influences of the waviness parameters, load, and speed values on the eight performance parameters are discussed.