Enhancing CFRP laminates with plasma jet arrays: A study of interlaminar mechanical properties

AbstractThis study delves into the efficacy of plasma jet array treatment in bolstering the interlaminar toughness of Carbon Fiber Reinforced Polymer (CFRP) prepregs, a crucial parameter for their deployment in high‐performance domains. Employing high‐frequency pulsed microsecond plasma jet arrays for surface modification, this research not only demonstrated a 19.49% upsurge in peak load capacity but also a remarkable 29.94% enhancement in Mode I interlaminar fracture toughness, as evident from Double Cantilever Beam (DCB) tests. Furthermore, the surface wettability improvements were underscored by a substantial decrease in water contact angle from 108.33° to 31.45° and a total surface energy augmentation from 12.20 to 64.16 mN/m, post a 1‐min plasma treatment. X‐ray Photoelectron Spectroscopy (XPS) results indicated an appreciable rise in oxygen functionalities, suggesting enhanced resin‐fiber bonding. Additionally, Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) analyses revealed notable decreases in surface roughness and microscale defects, contributing to smoother surfaces conducive to better adhesive bonding and reduced manufacturing defects. These multifaceted improvements, stemming from alterations in surface chemistry and topography, underpin the significant potential of plasma treatment in advancing CFRP laminate applications requiring superior durability and mechanical resilience.Highlights A plasma jet arrays method to enhance CFRP's interlaminar properties was studied. The influence mechanism of plasma modification was revealed in detail. The interlayer toughening mechanism of CFRP after plasma modification is proposed.