Preparation and characterization of titanium gypsum artificial aggregate
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS(2024)
摘要
In this study, solid waste titanium gypsum (TG) was used as raw material to design the basic mix ratio of aggregate, and TG artificial aggregate (TGA) was prepared based on alkali-activated cold bonding technology. The effects of different additives (slag, silica fume, and fly ash) on the properties of TGA were preliminarily investigated by using NaOH as activator in laboratory test, and the additives of TG aggregate were determined. Furthermore, the aggregate mix ratio was designed based on the additive, and the physical and mechanical properties, X-ray diffraction analysis, scanning electron microscopy analysis, and dry-wet cycle test of artificial aggregate were carried out. The results show that the artificial aggregate prepared by the same process and the aggregate prepared by silica fume as an additive has a high balling rate; it is technically feasible to use TG as the main raw material, silica fume as an additive, and NaOH as an activator to select a suitable mix ratio to prepare artificial aggregates. The microscopic test results reveal the internal products and structural degradation process of TG aggregate.
更多查看译文
关键词
titanium gypsum artificial aggregate,cold bonded granulation,properties characterization
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要