Synthesis optimization and separation mechanism of ZSM-5 zeolite membranes for pervaporation dehydration of organic solvents

Pervaporation (PV), as an energy-efficient mixture separation technology, plays an important role in the chemical industry. In this work, no organic templates were needed to produce high-performance ZSM-5 membranes with an extremely low Si/Al ratio of 3.3 on α-Al2O3 tubular supports using 100 nm nanoseeds. The effects of preparation parameters on the crystalline phase structures, micromorphologies, and PV separation performance of ZSM-5 membranes were comprehensively investigated. The results revealed that the Si/Al ratio of gels significantly affected both the Si/Al ratio and the crystal orientation of the final ZSM-5 membrane. The optimized ZSM-5 membrane with a thickness of 1.8 μm was utilized to dehydrate various organic solvents via PV, and the influence of the operating parameters on PV dehydration performance was evaluated and is described herein. Furthermore, the permeation behaviors of single gases and PV were examined using permeate molecules within a similar size range to reveal the PV mechanism of the ZSM-5 membrane. The results demonstrated that gas permeation followed Knudsen diffusion, while PV permeation was decreased with decreases in the affinity of molecules, revealing an adsorption-diffusion mechanism that dominated PV dehydration through the ZSM-5 membrane. Moreover, the as-synthesized ZSM-5 membrane had good water permselectivity for water/acetone (e.g., total flux = 1.03 kg/(m2 h), α = 307) and for water/isopropanol (e.g., total flux = 1.49 kg/(m2 h), α = 1070) mixtures compared with other membranes reviewed in the literature. The synthesized ZSM-5 membrane also exhibited excellent reproducibility, high stability, and attractive PV separation performance, demonstrating its significant potential application in the PV dehydration of organic solvents.