Uniaxial deformation behaviors and mechanism of Ti-6Al-4V alloy with bi-oriented grains

It is of great importance to investigate the deformation and damage mechanisms of polycrystalline materials with soft crystal orientations, considering the soft grains are usually the fatigue crack initiation sites. In this study, a Ti-6Al-4V alloy fully consisted of <01 0> and < 2 0> α (soft) grains was prepared and its uniaxial deformation behavior was investigated. Interestingly, no significant asymmetry on the tension-compression yield strength was found in this alloy with bi-grain orientations, though mechanical asymmetry was generally found in the traditional Ti alloys with strong texture. After high temperature solution treatment, the preferred bi-orientations were retained and the asymmetry degree of yield strength did not change, showing an excellent stability in texture and mechanical performance. Deformation mechanisms during tension and compression were studied and discussed. This work provides a new understanding on the deformation and damage mechanisms in the grains with soft crystal orientations, and may guide the microstructural design of Ti alloy for pursuing high mechanical and fatigue performances in the future.