Mechanical testing and numerical simulation of intelligent terminal structure of rockbolt used as a deformable support and for safety monitoring in rock engineering

The nonlinear mechanical behavior perception and deformation control of engineering rock masses are crucial technical challenges in the fields of underground engineering support and safety monitoring. An intelligent terminal structure (ITS) of rockbolts was designed for deformable support systems and safety monitoring in rock engineering applications. It is a type of device installed at the end of a traditional bolt. The ITS comprises two key components: a memory tooth and a yielding ring. This study introduces the design principle of an ITS in deformable rockbolt support systems. It proposes design parameters for the ITS in relation to the deformations encountered by engineering rockbolts. Tests were conducted to measure the ultimate bearing capacity and deformation of the ITS under pull-out conditions. The results demonstrate that the ITS of rockbolt undergoes deformation in the form of elongation as opposed to conventional bolts. Furthermore, finite element numerical simulations were conducted to investigate the mechanism of interaction between the memory tooth and yielding ring of the ITS. The numerical simulation results are consistent with the experimental results. The load capacity of the yielding ring exceeded that of the memory tooth. The field test results indicate that the dilatation of the surrounding rock mass causes ITS deformation in the diversion tunnel. The axial stress load exerted on the rockbolt is transferred to the ITS, leading to memory tooth breakage and compression deformation of the yielding ring. This mechanism allows the load and deformation of the surrounding rock mass to be reflected. The ITS not only serves as a deformable support system but also plays a significant role in monitoring the stress and deformation of the rock mass.