Impact response of stainless steel tube locally-strengthened by concrete-filled steel tube

This paper proposes a novel stainless -steel tube locally strengthened by a concrete -filled steel tube to resist impact loads. A drop hammer impact test system was used to determine the failure modes, impact forces, and displacement responses of the strengthened tubes under an impact load. The effects of the strengthening length and thickness of the concrete and outer steel tubes on the impact responses of the strengthened tubes were investigated. The impact resistance was found to improve with an increase in the thickness of the concrete and outer steel thickness. The test results also indicated that the strengthened tubes exhibited a flexural failure mode with a combination of local and global deformations. An analytical model for predicting the dynamic responses of the locally strengthened tubes was established based on an equivalent two -degree -of -freedom (TDOF) model. The analytically predicted results were compared with the experimental results, and the good consistency between these two results demonstrated the accuracy of the established analytical model.