Experimental and Numerical Investigation of the Thermal and Force Regulation Mechanism of Bypass Coupling Double-Sided Arc Welding Based on 6061 Aluminum Alloy

In this study, 6061 aluminum alloy was proposed for welding using bypass coupling double-sided arc welding (BCO-DASW) to further improve its welding quality and efficiency. To gain insight into the thermal and force regulation mechanism of the BCO-DASW of 6061 aluminum alloy, the dynamic effects of the high-temperature plasma inside the arc with various parameters were fully compared and investigated through the combined method of the physical experiment and the numerical simulation. The thermal flow field of the hybrid arc was analyzed numerically. Furthermore, its working adaptability and mechanical behaviors were studied experimentally. The results show that a single penetration of the 6 mm sheets can be achieved without visible defects when the center offset of the arcs is within 3 mm on both sides of the base metal during BCO-DASW. Through the thermal analysis, it was found that, compared with the MIG process, the introduction of the bypass arc lead to a temperature decrease at the bottom of the hybrid arc due to energy redistribution. Furthermore, through the kinetic analysis, it was found that not only could the level of arc pressure be reduced, but also the action range of the arc pressure could be regulated up to 4.6 mm. The thermal force regulation mechanism worked together to enhance the stability of the molten pool and achieves good joint strength during the BCO-DASW of 6061 aluminum alloy. This research not only has great significance in further improving the welding quality and efficiency of aluminum alloy, but also deeper understanding of the energy regulation mechanism during aluminum alloy welding.