Key Roles of Initial Calcination Temperature in Accelerating the Performance in Proton Ceramic Fuel Cells via Regulating 3D Microstructure and Electronic Structure
SMALL STRUCTURES(2024)
摘要
Developing cathode materials with high performance in oxygen reduction reaction (ORR) is desirable for proton ceramic fuel cells (PCFCs) for energy conversion technology. BaCo0.4Fe0.4Zr0.1Y0.1O3-delta (BCFZY) is widely investigated as a cathode. Herein, BCFZY cathode is used as a paradigmatic example to study the impact of calcination temperature on microstructure, electronic structure, and ORR performance. Ion beam-scanning electron microscopy indicates BCFZY prepared at 800 degrees C (BCFZY800) exhibits the largest specific surface area and cathode/electrolyte contact area. BCFZY800 exhibits a peak power density of 1.32 W cm-2 at 650 degrees C, which is 37% and 193% higher than that of BCFZY prepared at 700 degrees C (BCFZY700) and 1100 degrees C (BCFZY1100), respectively. Furthermore, BCFZY800 demonstrates high long-term stability over 500 h. Soft X-Ray absorption spectra indicate that the oxidation state of BCFZY800 is reduced, suggesting more catalytically active sites than those of BCFZY700 and BCFZY1100 after the ORR. This work provides a new understanding for enhanced PCFCs performance by proper porosity structure via fine-tuning the calcination temperature. This study presents a fresh perspective on the significant impact of adjusting the initial calcination temperatures (700-1100 degrees C) of BaCo0.4Fe0.4Zr0.1Y0.1O3-delta (BCFZY) powder on fuel cell performance from the aspects of 3D microstructure and electronic structure. Notably, the single cell with BCFZY800 cathode calcined at 800 degrees C exhibits the highest power density, reaching 1.32 W cm-2 at 650 degrees C.image (c) 2024 WILEY-VCH GmbH
更多查看译文
关键词
electronic structures,perovskites,proton ceramic fuel cells,X-Ray absorption spectroscopy,3D microstructural evolution
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要