Fretting fatigue damage mechanism of Ti6Al4V dovetail joint specimens at high temperature treated with salt layer

Salt layer preparation on the contact surface of Ti6Al4V dovetail joint specimens using solid NaCl and Na2SO4 deposition, the effect of hot salt layer on fretting fatigue properties of Ti6Al4V alloy at high temperature was studied. The maximum stress load and temperature are 10kN and 500 °C, respectively. The results show that the average fatigue life of the base metal dovetail joint sample (BM sample) is 9.93×104, and the average fatigue life of the hot salt dovetail joint sample (HS sample) is increased to 69.9×104. The increase in fatigue life stems from the fact that the hot salt layer promotes the generation of thicker loose oxides on the surface of the Ti6Al4V alloy, besides, the lubricating effect of the oxide with higher hardness and the wear debris alleviates the fretting damage between the dovetail joint sample and the contact surface of the fretting pad. Fracture analysis shows that the hot salt layer does not change the crack initiation mechanism, and all of them show single crack source propagation and ductile fracture mechanism. Analysis of crack formation zone by electron back-scattered diffraction (EBSD), it is found that the presence of less dislocation distribution in the HS sample relative to the BM sample. The dislocations are more concentrated on the crack propagation paths and the fretting fatigue contact surfaces. This indicates that the BM sample produced more significant plastic deformation in the crack formation zone, accelerating crack initiation. The contact surface plastic deformation of the HS sample is small and the fretting fatigue life is enhanced.