Shakedown of metallic sandwich beams when subjected to repeated impact loadings
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES(2024)
Abstract
When a monolithic metallic beam/plate subjected to repeated dynamic loadings with fixed impact level experiences elastoplastic deformation, its measurable deformations may cease to develop for further repetitions of the same dynamic load: this phenomenon was referred to as "pseudo-shakedown" in previous studies (Jones, 2014; Shen and Jones, 1992). Would pseudo-shakedown occur in a metallic sandwich structure under repeated shock loadings remains elusive. A combined experimental and numerical study was carried out to explore whether dynamic shakedown could occur in all-metallic ultralightweight corrugated core sandwich beams. For repeated impact tests, the sandwich beams were fabricated via the sequential process of cutting-stamping-vacuum brazing. When subjected to repeated impact loads (achieved via aluminum foam projectiles launched from a light gas gun), the dynamic responses of each sandwich specimen - including structural evolutions, beam deflections, and deformation/failure modes - were measured. Experimental results revealed that, depending upon the level of impact momentum applied to the sandwich beam, either dynamic shakedown or progressive failure could occur. The method of finite elements (FE) was subsequently employed to simulate the repeated shock tests, which was validated against experimental measurements, with good agreement achieved. To explore the physical mechanisms underlying the observed dynamic shakedown, the FE results of final plastic energy and effective plastic strain distribution in the sandwich beam were extracted and analyzed. When shakedown occurred, the measurable permanent deformation of the sandwich beam kept a relatively stable state, but its plastic energy remained positive, which is different from its monolithic beam/plate counterpart (i.e., plastic energy dropping to zero during dynamic shakedown). Such difference is mainly attributed to stress concentration occurring at the connecting joint points between the corrugated core and face sheets of sandwich and clamped endings, which produces plastic deformations that are difficult to reflect in overall large deformations of the beam. Consequently, the dynamic shakedown of metallic corrugated core sandwich beam captured in this study appears to be inexhaustive and hence may be termed as the "apparent pseudo-shakedown" (with danger lurking in the welding joints as well as clamped endings). Finally, based on a simplified bi-linear hardening constitutive law, the mechanisms underlying the dynamic shakedown of sandwich beam were further discussed from a purely base material point of view.
MoreTranslated text
Key words
Metallic sandwich beam,Repeated impact loadings,Foam projectile,Plastic deformation,Pseudo-shakedown
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined