Same volume, larger output: 3D trapezoidal multi-interface solar evaporator for concentrated seawater desalination and wastewater treatment

With the scarcity of freshwater resources, solar desalination of seawater is a promising strategy for freshwater production. Compared to 2D evaporators with limited evaporation area, 3D evaporators can increase the evaporation area. However, traditional 3D evaporators cannot fully utilize the internal space of the evaporator for evaporation. In this study, a 3D trapezoidal multi-interface evaporator (Evap1), which composed of superhydrophilic sponges and superhydrophobic sponges arranged by alternate permutation for making full use of the inside structure of the evaporator to expand the actual evaporation area and achieve effective thermal management, were developed. The selective water transport channels and heat transfer channels were constructed by alternate permutation of hydrophilic and hydrophobic sponges in Evap1, while the top trapezoidal structure prevented heat from accumulating on the top surface of Evap1, which can enhance the efficiency of photothermal conversion. The Evap1 exhibited excellent evaporation rate of 3.6 kg m−2 h−1 under 1 sun illumination, and the evaporation rate was almost unchanged in brine with 20 wt% concentration for 8 h working. In addition, the Evap1 can achieve efficiently purificaiton of waste water containing dye, and the potential practical application of Evap1 was further proved by repeated and outdoor evaporation experiments.