Validation of a patient-specific finite element analysis framework for identification of growing rod-failure regions in early onset scoliosis patients

Growing rods are the gold-standard for treatment of early onset scoliosis (EOS). However, these implanted rods experience frequent fractures, requiring additional surgery. A recent study by the U.S. Food and Drug Administration (FDA) identified four common rod fracture locations. Leveraging this data, Agarwal et al. were able to correlate these fractures to high-stress regions using a novel finite element analysis (FEA) framework for one patient. The current study aims to further validate this framework through FEA modeling extended to multiple patients. Three patient-specific FEA models were developed to match the pre-operative patient data taken from both registry and biplanar radiographs. The surgical procedure was then simulated to match the post-operative deformity. Body weight and flexion bending (1 Nm) loads were then applied and the output stress data on the rods were analyzed. Radiographic data showed fracture locations at the mid-construct, adjacent to the distal and tandem connector across the patients. Stress analysis from the FEA showed these failure locations matched local high-stress regions for all fractures observed. These results qualitatively validate the efficacy of the FEA framework by showing a decent correlation between localized high-stress regions and the actual fracture sites in the patients. This patient-specific, in-silico framework has huge potential to be used as a surgical tool to predict sites prone to fracture in growing rod implants. This prospective information would therefore be vital for surgical planning, besides helping optimize implant design for reducing rod failures.