Demonstration of computer vision for void characterisation of 3D-printed continuous carbon fibre composites

Microstructural void formation during the processing of continuous fibre-reinforced polymer composites are a significant limitation of processes such as 3D printing, as voids inhibit resultant mechanical properties. Traditional optical microscopy approaches to void characterisation are tedious and are prone to errors due to non-ideal but realistic image conditions, including low contrast typical of microscopic images. This paper proposes a novel application of automated computer vision image processing techniques (i.e. a contrast-limited adaptive histogram equalisation (CLAHE) algorithm and Otsu's method) for detailed void characterisation of continuous fibre-reinforced composites. Microstructural void fraction was subsequently determined for both unidirectional and bi-axial laminates of a variety of thicknesses. The void characterisation by computer vision was shown to produce comparable results with manual contrast/brightness control, but with significantly less standard deviation. The computer vision software used in void characterisation is made freely available online at https://github.com/Xiao-ying/VoidDetector.