Performance Improvement of a High Loading Centrifugal Compressor with Vaned Diffuser by Hub Contour Optimization

High-pressure ratio centrifugal compressors' diffusers face challenges from high-velocity, non-uniform flow at the impeller outlet, decreasing efficiency and stall margin. To address this, this paper presents a novel vaned diffuser passage design method that successfully improved the compressor's performance. An optimization method using axisymmetric hub contours and NURBS curves was applied to modify the diffuser's design. After optimization, centrifugal compressor peak efficiency increased by 0.78%, and stall margin expanded from 12.8% to 20.4%. Analysis at the peak efficiency point showed loss reduction mainly from decreased recirculation and mixing losses in the diffuser's vaneless and semi-vaneless spaces. Furthermore, correlation analysis and Mach number distribution revealed that flow behavior at the diffuser's leading edge significantly influences efficiency. Consequently, design principles emphasize satisfying specific Mach number distribution rules at the diffuser's leading edge under certain inflow conditions for optimal performance.