Impurity sensitivity analysis for activated structure materials of OPR-1000

Various kinds of radioactive wastes are expected to be generated resulting from the decommissioning of nuclear power plants. For the safe management of decommissioning wastes, the preliminary classification of radioactive wastes such as very low level, low level, intermediate level, and regulatory clearance has to be performed. In this regard, we intend to conduct an activation analysis and radioactive waste level estimation using a computational simulation code for the structure materials of an OPR-1000, a standard nuclear power plant in South Korea. In addition, the structure material that constitutes the reactor vessel, reactor vessel internals, and bio-shield concrete of the nuclear power plant contains small amounts of unintended impurities. The results of the activation analysis may vary depending on the presence of those impurities. In this study, a detail modeling of nuclear reactor and the activation analysis are carried out combined the MCNP code with the ORIGEN-S code. Based on this methodology, the sensitivity test is done for impurities of structure materials. From the result of the specific activity of activated structure material, the cobalt impurity is found to be the most important contributor in the level determination of radioactive wastes. However, the bio-shield concrete has the highest specific activity when Li impurity is contained. From this study, some impurities affect radioactive waste level, thus it is recommended to consider structure material impurities for decommissioning the nuclear power plants.