Efficient conversion of lignin-derived phenols to cycloalkanes over bifunctional catalysts with low loading of ruthenium

Hydrodeoxygenation (HDO) reactions are extensively employed in the conversion of biomass to advanced fuels, which rely heavily on bifunctional catalysts that contain both a metal component and an acidic component. A significant challenge in the development of HDO catalysts is the need to reduce costs while simultaneously enhancing catalytic efficiency. Here, a series of Ru@W/ZrO2 catalysts with an extremely low loading of Ru (0.5 wt%) were successfully synthesized using different Ru or W loading sequences and different Ru/W mass ratios. The catalysts were applied in the HDO reaction of lignin-derived phenols, and their physical and chemical characteristics were revealed by various characterization techniques, including XRD, H2-TPD, NH3-TPD, and XPS. The results suggest that the synthesis method with post-loading Ru leads to improved exposure and utilization of the low-loaded Ru, which effectively serves as the active sites for hydrogenation in catalytic reactions. Under the same reaction conditions, the bifunctional catalyst with post-loading of Ru achieved a complete conversion of phenol into cyclohexane, while the catalyst with simultaneous loading of Ru and W only yielded 42% of cyclohexane. In addition, the Ru/W ratios have also shown significant effects on the HDO performance of the catalyst. The catalyst exhibits the highest hydrogenation activity when the Ru/W ratio is 10, which is further supported by kinetic experiments. This study highlights the significance of the loading sequence of noble metals and the metal/acid ratio in the synthesis of highly active bifunctional catalysts, and also lays the groundwork for the efficient utilization of noble metals in biomass HDO conversion.