Preparation and Performance of Micro-Arc Oxidation Coatings for Corrosion Protection of LaFe_11.6Si_1.4 Alloy

The microstructure, corrosion resistance, and phase-transition process of micro-arc oxidation (MAO) coatings prepared on LaFe11.6Si1.4 alloy surfaces in different electrolyte systems were systematically investigated. Research has demonstrated that various electrolyte systems do not alter the main components of the coatings. However, the synergistic action of Na2CO3 and Na2B4O7 more effectively modulated the ionization and chemical reactions of the MAO process and accelerated the formation of α-Al2O3. Moreover, the addition of Na2CO3 and Na2B4O7 improved the micromorphology of the coating, resulting in a uniform coating thickness and good bonding with the LaFe11.6Si1.4 substrate. The dynamic potential polarization analysis was performed in a three-electrode system consisting of a LaFe11.6Si1.4 working electrode, a saturated calomel reference electrode, and a platinum auxiliary electrode. The results showed that the self-corrosion potential of the LaFe11.6Si1.4 alloy without surface treatment was −0.68 V, with a current density of 8.96 × 10−6 A/cm2. In contrast, the presence of a micro-arc electrolytic oxidation coating significantly improved the corrosion resistance of the LaFe11.6Si1.4 substrate, where the minimum corrosion current density was 1.32 × 10−7 A/cm2 and the corrosion potential was −0.50 V. Similarly, after optimizing the MAO electrolyte with Na2CO3 and Na2B4O7, the corrosion resistance of the material further improved. Simultaneously, the effect of the coatings on the order of the phase transition, latent heat, and temperature is negligible. Therefore, micro-arc oxidation technology based on the in situ growth coating of the material surface effectively improves the working life and stability of La(Fe, Si)13 materials in the refrigeration cycle, which is an excellent alternative as a protection technology to promote the practical process of magnetic refrigeration technology.