Preliminary design of an ATC support tool for the implementation of the Ad Hoc Separation Minima concept in an en-route sector.

Abstract The current aim in response to the anticipated growth in air traffic demand is to expand airspace capacity. However, this poses a challenge, as many airspace volumes are nearing saturation. An influential factor in determining airspace capacity is separation minima, which have remained unchanged for more than two decades. It seems that technological developments in recent years, such as new aircraft capabilities and ATC (Air Traffic Control) support tools, may eventually enhance current separation minima standards. Consequently, there is a push to improve separation management by introducing new operational concepts. Ad Hoc separation minima are one such concept, allowing different separation values to be applied within the same airspace volume based on factors such as aircraft models, weights, and wind conditions, among others. These values are computed individually for each aircraft pair in each situation. Implementing different separation minima values within the same airspace volume requires a significant change in certain ATC activities. In addition, new functionalities or ATC support tools are essential, as Air Traffic Control Officers (ATCO) cannot mentally determine the appropriate separation value for each situation. To address this, a new tool, the Ad Hoc Separation Minima Tool (ASMT), is proposed. It aims to integrate this concept seamlessly into an en-route (ENR) sector without increasing ATCOs workload and altering ATC responsibilities. This study provides a high-level overview of the ASMT architecture, and its functional system has been evaluated in a simulated ENR sector using MATLAB®.