A Pressure-Oscillation-Based RON Estimation Method for Spark Ignition Fuels beyond RON 100
ENERGIES(2024)
Abstract
Knock in spark ignition (SI) engines occurs when the air-fuel mixture in the combustion chamber ignites spontaneously ahead of the flame front, reducing combustion efficiency and possibly leading to engine damage if left unattended. The use of knock sensors to prevent it is common practice in modern engines. Another measure to mitigate knock is the use of higher-octane fuels. The American Society for Testing and Materials' (ASTM) determination of the Research Octane Number (RON) and Motor Octane Number (MON) of spark ignition fuels has been based on measuring cylinder pressure rise at the onset of knock since its inception in the 1930s. This is achieved through a low-pass filtered pressure signal. Knock detection in contemporary engines, however, relies on measuring engine vibrations caused by high-frequency pressure oscillations during knock. The difference between conditions in which fuels are evaluated for their octane rating and the conditions that generate a knock intensity signal from the knock sensor suggests a potential difference between octane rating and the knock limit typically identified by a contemporary knock sensor. To address this disparity, a modified RON measurement method has been developed, incorporating pressure oscillation measurements. This test method addresses the historical lack of correlation between RON and high-frequency pressure oscillation intensity during knock. Using toluene standardization fuels (TSFs) as a reference, the obtained results demonstrate excellent high-frequency knock intensity-based RON estimations for gasoline. The method is able to differentiate between two fuels that share the same ASTM RON, associating them with a RON-like metric that is more aligned with their performance in a modern SI engine. This alternative method could potentially serve as a template for an upgrade to the existing ASTM RON method without significantly disrupting the current approach. Additionally, its capability to evaluate fuels beyond RON 100 opens the door to assessing a wider range of fuels for antiknock properties and the intensity of fuel oscillations during knocking combustion.
MoreTranslated text
Key words
spark ignition,knock,octane number,pressure oscillations,knock intensity
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined