Experimental study on crack propagation characteristics of unconventional reservoir rocks

This study investigates the fracture behaviour of three types of specimens (shale, sandstone, and coal), which are commonly found in unconventional reservoirs, based on mode Ⅰ single-edge notch beam (SENB) test. We employ the Digital Image Correlation technique to track the strain evolution and crack propagation paths of the three types of materials and compare their fracture characteristics. The experimental results show that both the surface roughness and crack initiation angle of the coal are larger comparing with that of sandstone and shale, which demonstrates the ductile property of coal and fracturing difficulty in coal seam. Moreover, the average velocity difference of crack propagation is obvious, which is 53.76 × 103, 453, and 0.33 mm/s in shale, sandstone, and coal, respectively. The elastoplastic J-R curves, which reflects the influence of the plastic zone, are presented to analyze the energy dissipation characteristics of three types of specimens during crack propagation. It is found that the J-integral of shale and sandstone does not increase with crack propagation, but the J-integral of coal shows obvious increasing trend with crack propagation due to the effect of plasticity. In addition, microscopic analysis is conducted using a petrographic microscope and scanning electron microscope (SEM) to explain the plastic zone differences at the notch tips of shale, sandstone, and coal. This study is a preliminary and significant step of hydraulic fracturing application in unconventional reservoirs for efficient recovery of the berried natural gas.