Efficient low-carbon manufacturing for CFRP composite machining based on deep networks

The drilling quality of carbon fibre reinforced polymer (CFRP) components is a key factor affecting the service life of the components, while energy saving and emission reduction in industrial production are crucial. In this study, drilling experiments were conducted on T300 plywood using a 55 degrees coated tungsten steel drill bit, and CNN-LSTM neural network models were used to construct mapping relationships between process parameters (spindle speed, feed rate, and fibre lay-up sequence) and delamination factor and machine energy consumption. A new method of predicting the delamination factor by process parameters is proposed, and explored the optimal process parameter combinations that reduce the energy consumption of machine tools and minimise the delamination factor at the same time. The research results show that within the parameter settings, a spindle speed of 7000 r/min, a feed rate of 40 mm/min, and a lay-up sequence of [0 degrees, 0 degrees, -45 degrees, 90 degrees]6s ensure both low power consumption in the drilling process and the highest possible hole quality. This paper clearly demonstrates the feasibility of achieving low-power, high-quality drilling of CFRP through parameter optimisation, providing guidance to the manufacturing industry to improve the quality of CFRP hole-making while easing the pressure on carbon emissions.