LoCal: An Automatic Location Attribute Calibration Approach for Large-Scale Deployment of mmWave-based Sensing Systems

Millimeter wave (mmWave) radar excels in accurately estimating the distance, speed, and angle of the signal reflectors relative to the radar. However, for diverse sensing applications reliant on radar's tracking capability, these estimates must be transformed from radar to room coordinates. This transformation hinges on the mmWave radar's location attribute, encompassing its position and orientation in room coordinates. Traditional outdoor calibration solutions for autonomous driving utilize corner reflectors as static reference points to derive the location attribute. When deployed in the indoor environment, it is challenging, even for the mmWave radar with GHz bandwidth and a large antenna array, to separate the static reference points from other multipath reflectors. To tackle the static multipath, we propose to deploy a moving reference point (a moving robot) to fully harness the velocity resolution of mmWave radar. Specifically, we select a SLAM-capable robot to accurately obtain its locations under room coordinates during motion, without requiring human intervention. Accurately pairing the locations of the robot under two coordinate systems requires tight synchronization between the mmWave radar and the robot. We therefore propose a novel trajectory correspondence based calibration algorithm that takes the estimated trajectories of two systems as input, decoupling the operations of two systems to the maximum. Extensive experimental results demonstrate that the proposed calibration solution exhibits very high accuracy (1.74 cm and 0.43. accuracy for location and orientation respectively) and could ensure outstanding performance in three representative applications: fall detection, point cloud fusion, and long-distance human tracking.