Field Testing and Numerical Simulation of the Dynamic Response of Loess Hill Site under High-Speed Train Load

In this study, the loess hill site of an elevated bridge section in Tongwei-Qin'an of the Baolan high-speed railroad was selected as the research object, and the vibration acceleration of the loess hill site under the elevated bridge was tested in the field under the train operating load. The results show that under the same intensity of train load, the time range of vibration acceleration observed by field test and numerical simulation decays linearly with increasing distance from the source, while the amplification effect appears in the loess hill site at a greater distance, and the vibration duration also appears to increase. The vibration acceleration waveforms at each observation point observed by field tests and numerical simulations are similar, and the peak vertical acceleration at each observation point obtained from numerical simulations is overall greater than the peak acceleration at each point obtained from field tests, with aSimulated- max/aObservated- max values ranging from 1.04 to 1.63. The Fourier spectrum frequencies recorded by numerical simulation and field test are mainly concentrated in the range of 1 similar to 40 Hz, but the difference between the main frequencies recorded by the two is large. The main frequency of the energy spectrum recorded by the numerical simulation is around 15 Hz, which is the same as the main frequency of the energy spectrum vibration of the input vibration wave, and the main frequency of the energy spectrum vibration recorded by the field test is around 25 Hz.