Optically biased and controlled signal processing in silicon photonics

OPTICS EXPRESS(2024)

引用 0|浏览4
暂无评分
摘要
Optically biased and controlled signal processing is demonstrated in a commercial foundry silicon photonics integrated circuit process. Data and control signals are carried by different wavelengths in a WDM format. Optical signals on bias and control channels are converted to electrical voltages using series stacked photodiodes operating in photoconductive mode. Two examples of this scheme, namely, an amplitude modulator and a two-tap sequence detector capable of supporting different modulation formats, are experimentally demonstrated. The amplitude modulator requires 0.25 mW of optical control signal power to tune its optical output power by 15 dB. The two-tap sequence detector maps the consecutive symbols of a modulated signal such as OOK, PAM-3, and PAM-4, to distinct levels. A maximum control signal power of 5 mW is needed to calibrate and bias the sequence detector. This latter scheme may be extended to detect longer sequences and other modulation formats.
更多
查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要