Improved machinability of single crystal silicon by applying in-situ laser-vibration hybrid assisted diamond cutting
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY(2024)
摘要
Single crystal silicon is an important optical material used widely in the infrared systems. The surface quality and subsurface damage of silicon seriously affect the service performance. In this study, an in-situ laser-vibration hybrid assisted diamond cutting technology is proposed. The properties of cutting device were tested as experimental parameters. A series of grooving experiments were carried out with different cutting methods and the microlenses on silicon were successfully fabricated based on better manufacturing parameters. The surface morphology and subsurface damage was investigated from sin-wave structure manufacturing. Experimental results show that in-situ laser-vibration hybrid assisted diamond cutting effectively improves surface quality and inhibits subsurface lattice distortion. Compared with conventional diamond cutting, the depth of brittle transition increases by about 10 times with 1075 nm. Under the same cutting parameters, the formation of surface cracks of microlenses and sin-wave structure are significantly inhibited by applying in-situ laser-vibration hybrid assisted diamond cutting. This new technology is an effective and promising method for ultra-precision machining silicon.
更多查看译文
关键词
Ultrasonic vibration cutting,Laser assisted cutting,Ductile machining,Micro-structures,Subsurface damage
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要